ri-champion smartPRO+ BP Monitor with Bluetooth and Wide Cuff

Additional information

Non-invasive, smart blood pressure monitor with Bluetooth & Wide cuff 

The Riester ri-champion® smartPRO+ Clinically validated blood pressure monitor, designed for fast and reliable readings. Advanced performance by indicating irregular heartbeat detection and average measurement function.

• 2 Cuff Versions available - Small and Wide
• Large LCD Backlit Display
• Fast and low noise measurements
• Irregular heartbeat detection
• Average BP measurement function
• 200 measurements with one set of batteries
• Optional Bluetooth connectivity
• Optional mains adapter
• Automatic off function - if left idle for 3 minutes
• CE /FDA approved
• IP21 Water protection

Specification 

• Power Source: Four 1.5 V AA alkaline batteries
• Battery Life: 200 Readings
• Size of Meter w/o Cuff: 141 (L) x 121 (W) x 72 (H)mm, 350 g without batteries
• Cuff Size: W (Wide size): 24 - 43 cm (9.4 - 16.9 inches) with air tube 80 cm
• Memory: Maximum 400 memory records
• External Output: Bluetooth included (Frequency: 2.45 GHz, Bandwidth: 170 MHZ, Modulation: GFSK, ERP: 3.54 dBm)
• Power Saving: Automatic power off if system idle for 3 minutes
• Operating Conditions: 5°C to 40°C (41°F to 104°F), 15 % to 93 % relative humidity, 700 hPa to 1060 hPa
• Storage / Transportation Conditions: -25°C to 70°C (-13°F to 158°F), 10 % to 95 % relative humidity
• Power Supply Input: DC + 6 V / 1 A (max) via Power Plug
• IP Classification: IP21 V

This device has been tested to meet the electrical and safety requirements of:
IEC/EN 60601-1, IEC/EN 60601-1-2, EN 301 489-17, EN 301 489-1, EN 300 328. Reference to Standards:

• EN 1060-3, NIBP-requirements IEC60601-1 General requirement for safety IEC60601-1-2 Requirements for EMC EN1060-4, NIBP clinical investigation AAMI / ANSI / IEC 80601-2-30, ANSI/AAMI/ISO 81060-2, NIBP requirements